1 introduction, Scope, Serial number location – In-Situ Level TROLL 400/500/700/700H Operators Manual User Manual
Page 7: Certification, Unpacking and inspection, Warranty, Contact information, Introduction
1-800-446-7488
7
www.in-situ.com
Introduction
The Level TROLL Instrument is a compact, modular system for measuring level and
temperature in natural groundwater, surface water, industrial waters, and other
installations.
Scope
This document is intended to describe the characteristics, operation, calibration, and
maintenance of the instrument. Communication registers and SDI-12 programming
information can be found in the Modbus and SDI-12 Reference Guides on the In-Situ
Inc. website.
Serial Number Location
The serial number is engraved on the instrument housing. It is also programmed into
the instrument and is displayed when the instrument is connected to a computer
running Win-Situ Software.
Certification
See the Declarations of conformity at end of this manual.
Unpacking and Inspection
Your instrument was carefully inspected before shipping. Check for any physical
damage sustained during shipment. Notify In-Situ and file a claim with the carriers
involved if there is any shipping damage. Accessories may be shipped separately and
should also be inspected for physical damage and the fulfillment of your order.
Please save packing materials for future storage and shipping.
The shipping boxes have been performance-tested and provide
protection for the instrument and its accessories.
Warranty
See the product specification tables for warranty information.
Contact Information
Mailing and Shipping
Address:
Phone:
970-498-1500 (international & domestic)
In-Situ Inc.
221 East Lincoln Avenue
Fort Collins, CO 80524
U.S.A.
Fax:
970-498-1598
Internet:
www.in-situ.com
Support:
800-446-7488 (U.S.A. & Canada)