KANOMAX 6006 Anemomaster LITE - Manual (Page 10)

Preparation for Measurement 9
Battery Level Indicator
Battery level is displayed as below depending on the charge left:
 Guaranteed operating voltage range of the battery is more than
4V.
 When battery voltage decreases to less than 4V, the display will
go on and off and the power will be turned off automatically.
 When you are using a charging battery, recharge the battery a
little early, before the 4.3V -4.0V mark is displayed.
Changing Units for the Readings
 The units can be changed using the
dip switch.
 You can find the dip switch in the
battery box.
(Lower than 4.0V)
(More than 4.6V）
Blinking of the indicator
(4.3V – 4.0V） (4.6V - 4.3V）
Sufficient
Replacement of
Batteries
Medium
*SW 2 is not used.
Units
１
SW No.
m/s °C
FPM °F
OFF (factory default)
ON
1
2
ON