KANOMAX 6006 Anemomaster LITE - Manual (Page 8)

Part Names and Functions (Instrument) 7
Part Names and Functions (Probe)
To replace the probe, push and hold the
buttons on both sides of the connector and
pull the probe out.
Do not remove or install the probe while
the power is on.
φ
約３．３
mm
Air Temperature (temperature
compensation) Sensor
Air Velocity Sensor
Directional Point
Sensor
Grip
* Air Velocity/Air Temperature
(temperature compensation)
sensors are built in.
*During measurement, the whole
surface of the sensor should be
exposed to the wind.
*Face it windward