KANOMAX 6006 Anemomaster LITE - Manual (Page 7)

6 Part Names and Functions (Instrument)
§ 1 Part Names and Functions (Instrument)
Part Names and Functions (Main Body)
＜Side＞
＜Front＞ ＜Back＞
Power/Function Switch is a multifunction switch that can be slid up and
down, and pressed.
1. Pressing will switch the power on and off. Press and hold the switch
for more than 1 second until the LED indicates the change of the
ON/OFF status.
2. Sliding the switch down will change the measurement mode in the
following order: FAST  SLOW  Air Temperature  FAST
3. Sliding the switch up will hold the display. Slide up, down or press
the switch to continue.
3. Pause
ON/OFF
1. Press and hold for more than 1
second.
2. FAST/SLOW/Air Temperature
Battery Case
Power/Function
Switch
Display
*Do not leave the
probe inlet open
except when
replacing probe.
Probe Connector
＜Enlarged view of the Power/Function Switch＞