KANOMAX 6006 Anemomaster LITE - Manual (Page 12)

Specifications 11
§ 4 Specifications
MODEL 6006
Items to Measure Clean air of normal pressure/humidity
Range
Air Velocity 0.01 m/s to 20.0 m/s (20 FPM to 3940 FPM)
Air
Temperature
-20 °C to 70.0 °C (-4 °F to 158 °F)
Accuracy
Air Velocity ±5% of reading or ±0.015 m/s (±3 FPM), whichever is greater
Air
Temperature
±1.0 °C (±2.0 °F)
Temperature
compensation
accuracy Air Velocity
±5% of reading or ±0.015 m/s (±3 FPM), whichever is greater,
(in the temperature range of 10 °C to 40 °C (50 °F to 104 °F))
Display
resolution
Air Velocity
0 m/s to 9.99 m/s : 0.01m/s (minimum)
10.0 m/s to 20.0 m/s : 0.1 m/s
0 FPM to 1958 FPM : 2 FPM (minimum)
1960 FPM to 3940 FPM : 20 FPM
Air
Temperature
0.1 °C (0.2°F)
Response
Air Velocity Less than one second (air velocity at 1 m/s (196 FPM) : 90% response)
Air
Temperature
Less than 30 seconds (air velocity at 1 m/s (196 FPM) : 90% response)
Function
(1) Battery Life Indicator (4 levels)
(2) FAST / SLOW (1 second or 5 second moving average)
(3) Change of units using dip switch (m/s and °C  FPM and °F)
(4) Hold Display
Dimensions
Probe : Approx. φ 6.1 (φ10.6) x 205 mm (φ 3.3 x approx. 1.5 m for cable)
Main body : Approx.60(W) x 120 (L) X 34 (H) mm
Power Source
Four AA batteries…manganese batteries, alkali batteries or charging batteries
(Ni-Cd, Ni-MH)
(Please purchase a special charger if you use charging batteries)
Battery Life
Approx. 4 hours (continuous measurement at 1 m/s air velocity using manganese
batteries)
Operating Environment
Main Body: 5 °C to 40 °C (41 °F to 104°F), with no visible condensation
Probe: -20.0 °C to 70 °C (-4 °F to 158°F), with no visible condensation
Storage Temperature
Range
-10 °C to 50 °C (14 °F to 122°F), with no visible condensation
Weight Approx. 180 g (including batteries)
Standard Accessories
Manganese AA size batteries (for test purpose)…………………………………… ４
Operation manual (this volume) ………………………………………………………… １
Carry case ………………………………………………………………………………………… １
Extension rod (166mm to 909 mm) ……………………………………………………… １
Option Spare probe
＊Supplied batteries are for tests. If the batteries are weak, replace them with new ones for
accurate measurement.