KANOMAX 6162 Anemomaster - Manual (Page 18)

2. Basic Operation 12
2.5 How to Change Data and Time
Display Key Procedure
MENU (1) Press MENU key.
△ , ▽
SET
(2) Select 5. UTILITY.
Then press SET key.
△ , ▽
SET
(3) Select 1. CALENDAR.
Then press SET key.
△ , ▽
SET
(4) Move the ▼ to the item to be
changed.
Then press SET key.
△ , ▽
SET
(5) The figure to be changed will be highlighted.
Then use △ ▽ keys to change the figure.
After the figure is changed, press SET key.
MENU
(6) To continue changing the date and time, repeat the above
procedure (4) and (5)
When you finished changing the data/time, press MENU key.
△ , ▽
SET
(7) Select 1. MONITOR.
Then SET key.
(8) The display will return to the original screen. Then check if the
date/time is changed correctly.
< CALENDAR >
DATE
2008. 07. 01
TIME
10 : 25
Year. Month. Date
Hour : Min.
* Second is not configurable.
< MENU >
1.MONITOR
2.MEASUREMENT
3.DATA OUTPUT
4.MEMORY CLEAR
5 .UTILITY
< UTILITY >
1 .CALENDAR
2.ANALOG OUTPUT
3.PROGRAM SET
4.RS-232C
< CALENDAR >
DATE
2008. 07. 01
TIME
10 : 25
▼
< CALENDAR >
DATE
2008. 07. 01
TIME
10 : 25
< CALENDAR >
DATE
2008. 07. 01
TIME
10 : 25
▼
< MENU >
1 .MONITOR
2.MEASUREMENT
3.DATA OUTPUT
08.07.15 FAST
10:26:40
12.8 m/s
27.5 ℃