KANOMAX 6162 Anemomaster - Manual (Page 8)

1. Getting Started 2
[Right Side]
[Left Side]
" P6
Probe Connection
Use the provided adapter. When the AC adapter
is connected, it will have a priority.
"P5
Air velocity and temperature are output simultaneously."P30
Output Voltage: DC0 ~ 1V
The output range can be changed from the menu.
Analog Output
Turn this ON to make the LCD screen be backlit
so that you can see the screen clearer even in a
dark place.
* Turn the backlight on only at the time of need
in order to prevent battery drain.
Backlight Switch
Turn the volume to the right and left to change
the brightness of the display. Adjust the volume
to make the displayed letters easily viewable.
Brightness Adjustment Volume
RS-232C (serial output)
To output raw data or memory data to a
computer or printer "P13, 32
Digital Output Terminal
Use this to use the remote control function
It responds to START/STOP key and HOLD key
in the operation area. This can be used to
start/stop a measurement or hold the screen.
Remote Terminal
AC Adapter Jack