AT&T System 25 - Manual (Page 22)

Display ✓ ❑
The console’s
incoming and
as follow:
built-in display provides visual information about
outgoing calls. Various uses for your display are
■
■
■
■
■
■
Handling calls more easily
Checking the time and date
Setting the alarm, time, day, date, and timer
Programming buttons or speed dialing codes from your
telephone
Using the system directory to check a specific person’s
number
Checking the feature or numbers that are stored on a button,
the identity of an incoming call, and the identity of a call on
hold.
Viewing Display Screens
The display can show two screens of information, each
containing up to 16 characters. (You can view only one screen at
a time. ) Screen 1 appears automatically y and indicates
information such as names and extension numbers (inside calls),
and identification of outside calls.
1 To view the information that appears on Screen 2 of the
display, press
SCROLL.
2 To return to Screen 1 of the display, press
SCROLL
again.
If Screen 2 of a display is a continuation of Screen 1, such as a
telephone number that is more than 14 digits, you will see a
dash at the beginning of Screen 2. The following is an example
of a double-screen display, in which the telephone number is
continued on Screen 2.
12345678909876
-54321
18