Position busy, Using the position busy feature, Display – AT&T System 25 User Manual
Page 41
Position Busy
❑
You can make your SLAC temporarily unavailable to most
incoming calls by pressing
POS BUSY
. This places your console
in the Position Busy mode and turns on the light next to your
POS BUSY
button.
If your company has two attendant consoles, the system sends
your incoming calls to the other attendant while your console is
in the Position Busy mode. (Only one console can be in the
Position Busy mode at the same time.)
If your company has only one attendant console, you can
activate Position Busy only if another telephone has been
specifically administered as a backup answering position.
Using the Position Busy Feature
1
Press
POS BUSY
to turn on Position Busy.
The light next to this button turns on.
2
Press
POS BUSY
to turn this feature off.
The light next to this button goes off.
Display
Activating or deactivating Position Busy does not affect the
display.
37