AT&T System 25 - Manual (Page 62)

Leave Word Calling
❑
You can use the Leave Word Calling feature only if the VOICE
POWER Voice Message System (VMS) is connected to your
System 25. You may want to use the Leave Word Calling
feature for any of the following reasons:
■
■
■
■
The person you called is busy
The call is unanswered
You have requested callback for that extension
You have been connected to Coverage for that extension
For instructions on obtaining messages left at your telephone,
see your System Administrator.
Leaving Messages While on a Call
1 Press
LEAVE WORD CALLING .
2 Listen for confirmation tone, then hang up.
NOTE: If you hear fast busy tone instead of confirmation
tone, either the other telephone does not have VMS assigned
to it, or the extension you dialed is invalid.
Leaving Messages When Not on a Call
1 Listen for dial tone, then press
LEAVE WORD CALLING .
2 Dial the extension of the other person.
3 Listen for confirmation tone, then hang up.
NOTE: If you hear fast busy tone instead of confirmation
tone, either the other telephone does not have VMS assigned
to it, or the extension you dialed is invalid.
58