AT&T System 25 - Manual (Page 81)

position busy
prime line
preference
queue
queueing tone
repertory dialing
ringback tone
ringing line
preference
SLAC
selector console
send all calls
signaling
feature that allows you to have calls that
normally come in to your console sent to
either another attendant console or to a
designated backup telephone.
feature that allows the telephone to select
a button automatically when you lift the
handset to place a call.
a specific “line-up” of calls waiting at the
system switch to be sent to the attendant
console for processing; also, a place where
calls are held until they can be acted upon
(such as a request for Callback).
five short tones indicating that your request
for a Callback is confirmed.
feature that allows you to program a
telephone number or account code into a
REP DIAL button and then dial by pressing
that button.
repeating on/off tone indicating that the
number you dialed is ringing.
feature that allows the telephone to select
the ringing line automatically when you lift
the handset to answer a call.
(Switched Loop Attendant Console) allows
you to perform special attendant tasks while
offering the same features as other
telephones in the system.
an adjunct to the SLAC. With this piece of
equipment you can quickly select buttons
instead of dialing extension numbers when
sending calls to people within your system.
feature that can be selected at a telephone
to send calls to a “covering” telephone.
feature that sends an audible alert to
another telephone without calling that
telephone.
77