When an incoming call is ringing, For someone else, For someone else, then calling the person back – AT&T System 25 User Manual
Page 39
Placing Calls (Continued)
When an Incoming Call is Ringing
1
Press an idle
LOOP
button,
The red light moves to the selected button.
2
Listen for dial tone.
3
Continue to place the call in the normal way.
For Someone Else
1
Answer the call.
2
Press
TRANSFER.
3
Dial the outside number.
4
Announce the call and hang up.
For Someone Else, then Calling the Person Back
1
2
3
4
5
Listen for dial tone and dial the outside number.
Announce the call.
Press
START
and listen for dial tone.
Dial the person
the call.
Press
RELEASE
for whom you placed the call and announce
and then hang up.
NOTE:
If your console has the
Automatic
Release
feature, you
do not have to press
RELEASE
to drop out of the call.
Hanging up or pressing
a
new
LOOP
button will
automatically drop you from the call.
(Continued)
35