KROHNE OPTIWAVE 6300C EN - Manual (Page 107)

DESCRIPTION OF HART INTERFACE
9
107
OPTIWAVE 6300 C
www.krohne.com 03/2014 - 4000547004 - HB OPTIWAVE 6300 R04 en
Device Order Number Rd / Version Number Rd / Ex Approval Rd / Service
Number Rd
Field Software Version
Main CPU Version
Rd
/ Comp. CPU
Version
Rd
/ DSP Version
Rd
Device Diagnostics
Overview (General)
Primary variable out of limits Rd / Non-primary variable out of limits
Rd / Primary variable analog output saturated Rd / Primary variable
analog output fixed Rd / Cold start Rd / Configuration changed Rd / Field
device malfunction Rd
Critical (Errors)
Spectrum Quality Bad Rd / Spectrum Invalid Rd / No Peak Plausible Rd /
Temperature Out Of Range Rd / Self Test Failed Rd / Microwave Check
Failed Rd / Peripheral Failure Rd / DSPFirmwareLoadError Rd
Informational (Warning) Upper Current output1 has saturated Rd / Upper Current output2 has
saturated Rd / Lower Current output1 has saturated Rd / Lower
Current output2 has saturated Rd / Measurement Old / Measurement
Tank Overfill Rd / Measurement Tank Bottom Rd / Measurement
Terminated Rd
Process variables
Level Rd / Distance Rd / Reflection Rd
Primary Output
Primary Function Rd / Distance I1 Rd / %Distance Rd
Secondary Output
Secondary Function
Rd
/ Level I2
Rd
/ %Level
Rd
Calibration Management
Define Test...
Enter Test Data...
Calibration Status...
Calibration History...
Methods
Access Rights Supervisor / Service
Save Parameters
Diagnostics and Test
Internal Test / Set Output1 / Set Output2
Calibrate Output1 Lower / Output1 Upper / Output2 Lower / Output2 Upper
Tables Volum/Mass Table / Linearisation Table / Delete Tables
Empty Spectrum Recording
Reset
Customer Reset / Factory Reset / Device Restart