KROHNE Summit 8800 Vol 1 - Manual (Page 38)

38 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 HARDWARE DETAILS 05
Figure 23 Board slots with mother board & rear view panel
The PSU board sits in the first port on the far left, and the Auxiliary board sits into the slot on the
far right.
All I/O boards including communication boards can be positioned in any slot, however good
engineering practice it is recommended that all I/O boards are positioned on the left and the
communication boards to the right.
5 .3 .1 CPU Board Description
The Central Processing Unit board is the computational process board and is the main process-
ing component for the SUMMIT 8800.
5 .3 .2 PSU Board Description
The PSU board can only be exchanged by qualified personnel. Only one of these cards is re-
quired in a chassis and this card must be positioned in the first left hand chassis slot position.
The function of the PSU card is to provide the power supply requirements of the SUMMIT 8800.
Figure 24 Power supply unit
5 .3 .2 .1 PSU Board Settings
Details of position of PSU Board Fuses