KROHNE Summit 8800 Vol 1 - Manual (Page 56)

56 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 HARDWARE DETAILS 05
Figure 50 Communication board link setting
Link Function Factory
setting
3 RS485 termination network connection port 1 OFF
4 RS485 termination network connection port 1 OFF
5 RS485 termination network connection port 2 OFF
6 RS485 termination network connection port 2 OFF
7 RS485 termination network connection port 3 OFF
8 RS485 termination network connection port 3 OFF
Table 19 Single Ethernet serial settings
5 .9 .3 .2 LED indications
LED Function Note
1 RED network collision Normally OFF
2 Not fitted no function
3 YELLOW 100M network Normally ON for 100M
4 GREEN network activity Normally flash
Table 20 Single Ethernet port LED indicators
5 .10 DSfG Board
The DSfG board handles the German DSfG protocol and is a qualified personnel exchangeable
plug in card, up to a maximum of 3 can be inserted in any of the user plug in slots in the SUM-
MIT 8800 chassis. Normally one will be installed together with a Dual Ethernet board where one
of the serial links is used to internally connect both boards.