KROHNE Summit 8800 Vol 1 - Manual (Page 76)

76 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 FIELD DEVICE CONNECTION 06
76 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol1 R02 en
SUMMIT 8800 OPERATION 07
7 .2 .4 .3 Alarm Log
A typical Alarm log display is shown below.
Figure 81 Alarm page
Accountable alarms are shown in Red and Non-accountable alarms and warnings in Blue.
Any current Alarm will be accompanied by a FLASHING LED of the corresponding alarm type
stating that an Alarm occurrence has not been acknowledged.
An Alarm can be acknowledged by selecting the Acknowledge button at the bottom of the Alarm
Log page. Once acknowledged, the corresponding Alarm LED will stop flashing and will be on
continuously.
Past alarms can be cleared from the Alarm Log by pressing the Clear button at the bottom of
the Alarm Log page.