KYORITSU 6305 Quick Manual - Manual (Page 12)

− 11 − KEW6305
KEW6305 Setting procedure
4-1. Setting procedure
STEP1 Set the Function Switch to SET UP Range. (to show the Set-up screen)
STEP2 Use the Cursor keys and switch the Setting items with Setting no. 01 to 27.
(Up) (Right)
for increasing numbers,
(Left) (Down)
for decreasing numbers.
STEP3 Press on the desired Setting no..
(corresponding setting item starts blinking and enters into the setting change mode.)
STEP4 Use the Cursor keys and change settings.
Item no.
Set-up screen
3P3W (default setting)
3P4W 1P2W(1ch)
1P3W 1P2W(3ch)
1P2W(2ch)
< Example >
3P3W3A
or
or
Setting no. “ 01”, Setting Item “Wiring system”:
Setting: Select any one of 1P2W(1ch)/1P2W(2ch)/1P2W(3ch)/1P3W/3P3W/3P3W3A/3P4W.
STEP5 Confirm the changed setting. STEP5 Cancel the change.
(Press .) (Press .)
Setting completes. Go to STEP 2 for the other settings.