KYORITSU 6305 Quick Manual - Manual (Page 7)

− 6 − KEW6305
KEW6305 Symbols displayed on the LCD
< Symbols appear to show the state of the instrument or measurement >
Symbol Description
Keys are being locked.
Preset voltage value is exceeded.
Preset current value is exceeded.
Operating with AC power supply.
Operating with batteries.
Data hold function is active.
SET UP Range is selected.
WIRING CHECK Range is selected.
Blinks while instantaneous value is being displayed on the LCD.
Blinks while integration value is being displayed on the LCD.
Blinks while demand value is being displayed on the LCD.
Capacity of SD card or internal memory is full.
DATA CHECK Range is selected.
Data can be saved in the SD card.
* Blinks while saving data.
USB cord is connected to the terminal.
* Blinks during data communication.
Using Bluetooth communication.
Data can be saved in the internal memory.
* Blinks while accessing to the memory.
VT ratio is set to other than “1”.
CT ratio is set to other than “1”.