KYORITSU 6305 Quick Manual - Manual (Page 9)

− 8 − KEW6305
KEW6305 Cord connection
Cord connection
Start-up screen
KEW6305 will be powered on when setting the Function switch to any position other than OFF.
All of the LCD segments will be displayed first, and then model name with version information.
After that, stand-by screen for the selected range will be displayed.
Upon powering on the instrument, self-check routine initiates automatically. Stop using the instrument if
error message appear on the LCD after self-check and refer to (Section 15) Troubleshooting in the full
instruction manual.
Match the
arrow marks.
Rated supply voltage : 100 - 240VAC(±10%)
Rated supply frequency : 45 - 65Hz
Max power consumption : 10VAmax
Voltage test lead
Power cord
Clamp sensor
Error No. (001 – 063)