KYORITSU 6305 Quick Manual - Manual (Page 16)

− 15 − KEW6305
KEW6305 Selecting/switching display contents
6-2. Selecting/switching display contents
Three parameters (max) can be displayed in one screen. (In the example 1-A below, V, A and P are
displayed.) Display screen will be different depending on wiring systems.
● e.g. For Three-phase 4-wire “3P4W” (16 screens):
Screen 1-A
A B C D E F G H
1
Blink
(Screen) (1-A) (1-B) (1-C) (1-D)
− − −
Top V
A
P V1
A1
P1 V2
A2
P2 V3
A3
P3
Middle
Bottom
2
Blink
(Screen) (2-A) (2-B) (2-C) (2-D)
− − −
Top P
S
PF
P1
S1
PF1
P2
S2
PF2
P3
S3
PF3
Middle
Bottom
3
Blink
(Screen) (3-A) (3-B) (3-C) (3-D) (3-E) (3-F) (3-G) (3-H)
Top V1
V2
V3 A1
A2
A3 P1
P2
P3 PF1
PF2
PF3 S1
S2
S3 Q1
Q2
Q3 f
In
−
VL12
VL23
VL31
Middle
Bottom
* Screen 1-A is displayed after powering on the instrument.
* Use or Key to switch screens listed above in a horizontal direction.
(from 1-A to 1-D, 2-A to 2-D and 3-A to 3-G)
* Use or Key to switch screens listed above in a vertical direction. (from 1-A to 3-A only)
On any of screens 1-B to 1-D, press to switch screen to 3-A or to switch screen to 2-A.
On any of screens 2-B to 2-D, press to switch screen to 1-A or to switch screen to 3-A.
On any of screens 3-B to 3-G, press to switch screen to 2-A or to switch screen to 1-A.
* Phase no.❶,❷,❸ will be displayed on the LCD.
(e.g.: On screen 1-B, only one Phase no. symbol “❶” is displayed and on screen 3-A all Phase no.
symbols “❶,❷,❸” are displayed. However, none of them is displayed on screen 1-A, 2-A and 3-G.)
* Screen 3-A shows Phase voltage and Screen 3-H Line voltage.
Top : V
Middle : A
Bottom : P