NSi Industries DGUM-A Series - Manual (Page 5)

3
and minutes . Check AM/PM, and press ENTER .
3.0 DATE SET MODE
Press MONTH, DATE, and YEAR key to advance to
the desired month, date and year, then press ENTER .
NOTE: The day of the week will automatically set
once the date is entered .
4.0 DAYLIGHT SAVING TIME
After setting or modifying the date, display will show:
a . For standard USA daylight savings (DSt), press
MODE and go to step 5 .0 .
b . For dates other than standard USA dates, press
MONTH and go to step 4 .1 .
c . If daylight saving time (DSt) is NOT required, press
DEL display will show:
Press ENTER then go to step 5 .0 .