NSi Industries DGUM100 - Manual (Page 6)

1. U.S. OPTION: Daylight saving is automatically set
when entering the current month/date/year. The
unit will add one hour on the first Sunday in April,
and subtract one hour on the last Sunday in
October. You never need to look up the tables, or
enter the spring and fall correction dates yourself.
2. NO DAYLIGHT SAVING: The unit will not be con-
figured for daylight saving time corrections by not
entering the month/date/year.
TO SET DATE
Note: Enter only if automatic daylight saving is
desired. If not required, do not set date. Instead,
skip the following section and press MODE key
until display shows set.
Press MODE key until display shows DATE.
Press MONTH key to set present month. Press DATE
key to set today’s date. Press YEAR key to set present
year. Press ENTER key. Unit now stores present date.
NOTE: If the unit has correct entry for the calendar,
then the unit will go into the SET mode. If the calendar
has an incorrect entry, then the unit will stay in the
DATE mode, with MM--YY displayed, signifying that
the date does not correspond with the month, and/or
year, ie, Feb. 31, 2003. If this occurs, set the correct
date, and then press ENTER.
TO SET SCHEDULE
For convenience, write out your desired schedule on a
separate paper. If display does not show SET then
press MODE key until display shows SET. The display
will show --:-- 01, with the “01” signifying first entry for
ON or OFF. (For Model DGUM100, ON pulse or OFF
pulse).
6
DATE
Press ENTER to keep AM/PM format or press HOUR
key to alter to 24 hour (Military) format and then press
ENTER.
Once the ENTER is pressed, unit goes to RUN mode.
You can recognize that the unit is in the RUN mode
when the real time (including seconds) is displayed.
NOTE: Once you select and ENTER the above format
(either AM/PM or 24 hour military), you cannot alter it
without removing all power to the unit by disconnect-
ing the battery and line power.
TO SET CLOCK
Press MODE key; display shows CLK.
Press DAY/MONTH key to set today’s day. Press
HOUR key to set present hour (check AM/PM). Press
MIN key to set present minute. Press ENTER key. Unit
now stores present time. Seconds are set to zero.
DAYLIGHT SAVING
The user may select either standard U.S. Option or no
daylight saving at all.
5
SU
AM
OFF
SU
AM
CLK