NSi Industries DW200A - Manual (Page 8)

This means unit is ready to accept 2nd holiday date.
Use same procedure to set more holidays.
To delete a holiday date press the DLETE key.
Press ENTER.
5.0 SCHEDULE SET MODE
Press MODE key till display shows
In the SCHEDULE mode, the following information
is set:
1. CHANNEL selection (CH1 and CH2)
2. TIME: HOUR and MIN.
3. EVENT: ON or OFF
4. DAY: DAY or DAYS combination.
5. HOLIDAY
Now you are ready to begin setting the schedules.
There are a total of 99 ON/OFF events.
5.1 CHANNEL SELECTION
Press SELCT key to toggle between channel 1
and channel 2. When desired channel flashes,
begin setting hours and minutes.
5.2 SETTING HOURS AND MINUTES
Press HOUR and MIN keys to desired setting.
Press ON/OFF key to desired setting.
5.3 SETTING DAYS AND HOLIDAY
MO (Monday) is flashing - If Monday is desired,
press SELCT key. If Monday is
not desired, press
DAY key to pass Monday and advance to Tuesday.
a. Press SELCT key to select the flashing day, or
holiday.
b. Press DAY key to pass the flashing day and
advance to other days, or holiday
The same schedule will repeat on every holiday date.
5
SCH
CH 1
NOTE: SELCT key can also be used to delete a day,
or holiday previously selected when the aforemen-
tioned is flashing.
When you have desired time, event, and steady
days, press ENTER. This completes the first
schedule entry.
Now display shows that SCH 02 appears on the display.
This means unit is ready to accept 2nd schedule entry.
Use same procedure to set more SCHEDULES for
channel 1.
When you are finished setting schedules for chan-
nel 1, press SELCT key at the next blank sched-
ule screen and CH2 will flash. You can now begin
setting schedules for channel 2.
6.0 REVIEW, MODIFY AND DELETE
Use MODE key to advance to any of the following
MODES:
1. CLOCK MODE: Use HOUR, MIN, and DAY
keys to modify existing settings. Press ENTER.
2. DATE MODE: Use MONTH, DATE, and YEAR
keys to modify existing settings. Press ENTER.
3. DST Daylight Saving is automatic. You do
not have to enter start and stop dates. Unit cal-
culates 1st Sunday of April and last Sunday of
October. You do not have to remember to
change every year. To eliminate, press
ON/OFF key to OFF. Press ENTER.
4. HOLIDAY MODE: Holiday dates can be
changed or deleted. Press MONTH and DATE
keys or DLETE key. Press ENTER.
5. SCHEDULE MODE: Schedule review, modify,
delete. You can modify the schedule entry using
HOUR, MIN, ON/OFF key and SELCT key. Press
ENTER after each modification.
6
CH 1