NSi Industries DW200A - Manual (Page 9)

To delete, simply press the DLETE key when
unwanted information is on display. This will
blank the entry. Press ENTER to confirm. Do
not leave the MODE without pressing ENTER.
6. RUN MODE: Time and day is displayed. If today is a
programmed holiday, the H will be displayed steady.
7.0 OVERRIDE
OVR1 and OVR2 (override keys) are effective only
in the run mode.
The present load status of that channel will change
until the next scheduled event. CH# will flash when
the load is overridden from scheduled event.
NOTES:
1.
Unit will go to RUN MODE automatically if no key
is pressed for five minutes.
2. Units do not have look back feature. If you have
just finished setting the unit and an output is to be
presently ON, press the OVR key to turn it 0n. Unit
will automatically pick up the regular schedule
thereafter.
3. Units do not have stagger start.
4. Clear all memory. All memory can be cleared
using the following procedure: while in the RUN
mode, press Enter key, display shows:
Use ON/OFF key to display:
Now press ENTER briefly and everything in the
timer memory is wiped off including real time and
date.
7
OFF
ON
8
1
2
3
4
Holiday (H)
Date Description
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#