NSi Industries DWZ100A User Manual
Page 11
6. ASTRO MODE: Press LAT key to change latitude.
Press ENTER. Press DAY key and SELCT key
to add or delete days in the sunset mode.
Press OFFSET key to change offset time for
sunset or sunrise. Press ENTER after each.
7. RUN MODE: Time and day is displayed. If
today is a programmed holiday, the H will be
displayed steady.
8.0 OVERRIDE
OVR (override key) is effective only in the run mode.
The present load status will change until the next
scheduled event. CH1 will flash when the load is
overridden from scheduled event.
NOTES:
1.
Unit will go to RUN MODE automatically if no key
is pressed for five minutes.
2.
Units do not have look back feature. If you have
just finished setting the unit and an output is to be
presently ON, press the OVR key to turn it 0n. Unit
will automatically pick up the regular schedule
thereafter.
3.
Clear all memory. All memory can be cleared
using the following procedure: while in the RUN
mode, press Enter key, display shows:
Use ON/OFF key to display:
Now press ENTER briefly and everything in the timer
memory is wiped off including real time and date.
9
OFF
ON
10
1
2
3
4
Holiday (H)
Date
Description
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#