NSi Industries DWZ100A - Manual (Page 8)

Press MONTH key to advance to desired month.
Press DATE key to advance to desired date.
Press ENTER. Now display shows
This means unit is ready to accept 2nd holiday date.
Use same procedure to set more holidays.
To delete a holiday date press the DLETE key.
Press ENTER.
5.0 SCHEDULE SET MODE
Press MODE key until display shows
In the SCHEDULE mode, the following information
is set:
1. TIME: HOUR and MIN.
2. EVENT: ON or OFF
3. DAY: DAY or DAYS combination.
4. HOLIDAY
Now you are ready to begin setting the schedules.
There are a total of 99 ON/OFF events.
5.1 SETTING HOURS AND MINUTES
Press HOUR and MIN keys to desired setting.
Press ON/OFF key to desired setting.
5
H
SCH
CH 1
5.2 SETTING DAYS AND HOLIDAY
MO (Monday) is flashing - If Monday is desired,
press SELCT key. If Monday is
not desired, press
DAY key to pass Monday and advance to
Tuesday.
a. Press SELCT key to select the flashing day or
holiday.
b. Press DAY key to pass the flashing day and
advance to other days or holiday.
The same schedule will repeat on every holiday date.
NOTE: SELCT key can also be used to delete a day or
holiday previously selected when the aforementioned
is flashing.
When you have desired time, event, steady days,
press ENTER. This completes the first schedule
entry.
Now display shows that SCH 02 appears on the display.
This means unit is ready to accept 2nd schedule entry.
Use same procedure to set more SCHEDULES.
6.0 TO SET ASTRONOMIC SCHEDULE
Press MODE key until display shows
By default, latitude north 10° will appear on the display.
The latitude of your location can be set in this mode.
6
CH 1
CH 1