AT&T Definity 7410 - Manual (Page 11)

To program/reprogram an
outside number,
extension, or feature code
into a personal list 1
2
3
4
5
6
7
8
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want to
program as items on your personal list(s) (see example
to the left)
Note: Each phone number or feature code is stored
as a separate item.
Pick up handset [dial tone]
Press [ Program ]
or Dial Program code
[dial tone]
Dial Personal List number (1, 2, or 3)
[dial tone]
Dial list item (1, 2, 3...) [dial tone]
Dial number you want to program (up to 24 digits)
Note: If you are programming an outside number, be
sure to include a trunk code, if applicable.
Press [ # ] [confirmation tone], [dial tone]
● Number is stored
● Repeat Steps 5-7 if you want to program
additional items on the same list; press [
Drop/Test ]
and begin again at Step 1 if you want to program
items on another list
Hang up or press [ Drop/Test ] to end programming
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this booklet;
group, system, and enhanced lists can be obtained
from the System Manager.
[dial tone]
To place a call using a 1 Dial appropriate AD list code:
personal, group, system,
●
List 1
or enhanced list
●
List 2
● List 3
2 Dial desired list item (1, 2, 3...)
● Call is dialed
Note: You can program a list code on one of your
AD buttons for quicker access to a list. To place a
call, simply press the AD button and then dial the
desired list item.
8