AT&T Definity 7410 - Manual (Page 17)

Hold
✓
To keep a call on hold 1 Press [ Hold ]
while you answer another
●
Green light flutters
call, make a call, or
perform some other task
Note: If you put a conference call on hold, the other
parties remain connected.
To answer a new call 1 Press [ Hold ]
while active on another
● Green light flutters
2 Press [ xxxxx ] of incoming call
●
You are connected to incoming call
To return to held call 1 Press [ xxxxx ] of held call
●
You are connected to held call
Note: If you are active on a call and you press the
[
xxxxx ] of the held call, the active call will be
dropped.
Intercom (Automatic/Dial)
To make a call to 1
your predetermined
Automatic Intercom
partner
●
To dial a call
Press [ Icom Auto xxx ] [ringback tone]
Special intercom ring is sent
Note: If call is unanswered, press [ Go to Cover ] while
call is ringing if you want to redirect it to coverage.
1
to a member of your
Dial Intercom group
Press [ Icom Dial xxx ]
● Green light goes on steadily
[dial tone]
2 Dial group member’s 1- or 2-digit code
[ringback tone]
● Special intercom ring is sent
Note: If call is unanswered, press [ Go to Cover ] while
call is ringing if you want to redirect it to coverage.
14