AT&T Definity 7410 - Manual (Page 19)

To cancel a Leave Word 1 Press [ Cancel LWC ]
Calling message or Dial Leave Word Calling Cancel code
Note: You cannot cancel
[dial tone]
a message left for an 2 Dial extension [confirmation tone]
AUDIX subscriber.
Note: If reorder tone is heard, message is not
canceled; try again.
Message
✓
To retrieve a message 1 See your System Manager for instructions regarding
when your Message light your local message retrieval procedures. For
is on procedures for using the Voice Message Retrieval
feature, see “Voice Message Retrieval” later in
this section.
Priority Calling
To place a priority call 1 Press [ Priority ]
(3-burst ring) or Dial Priority Calling code
[dial tone]
2 Dial extension [ringback tone]
3 Wait for called party to answer
Note: If your call is not answered and you wish to
redirect it to coverage, press [
Go to Cover ] while call
is ringing.
To change a regular call 1 Press [ Priority ]
into a priority call (when
2 Wait for called party to answer
you hear a call waiting
ringback tone)
Note: If you still receive a call waiting ringback tone,
wait a few minutes and try again.
16