AT&T Definity 7410 - Manual (Page 13)

Bridging
To answer a bridged call 1 Press [ xxxxx ] of bridged call
Note: If your voice terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset.
To use Manual Exclusion 1 Press [ Exclusion xxxxx ] while connected to the call
to prevent other bridged
Note: Pressing [ Exclusion xxxxx ] again reactivates
terminals from entering a
bridging.
call (on a per call basis)
Call Coverage
To answer a call for a
co-worker for whom you
are a coverage point 1 Press [ xxxxx ] of incoming call when ring begins or
green light flashes
Note: If your voice terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset. Also, the call is not at your voice
terminal until the green light is flashing.
To leave a message for a 1 Press [ Coverage Callback ] while connected to the call
co-worker to call the [confirmation tone]
original caller’s extension
Note: To leave a message for a co-worker to call you,
activate Leave Word Calling instead.
To talk privately with a 1 Press [ Transfer ]
co-worker after answering
Call is put on hold
a redirected call
●
2 Press [ Consult ] [priority ring to co-worker]
or Dial co-worker’s extension
Note: You can privately discuss the call at this time;
if your co-worker is not available, press the fluttering
[
xxxxx ] to reconnect to call.
3 Press [ Transfer ] again to send call to co-worker or
press [ Conference/Ring ] to make it a 3-party call
10