AT&T Definity 7410 - Manual (Page 15)

To retrieve a parked call 1 Pickup handset or press [ Speaker Reset Spkr ]
from any extension
[dial tone]
2 Dial Answer Back code
[dial tone]
3 Dial extension number where call is parked
[confirmation tone]
Note: If you receive intercept tone, parked call has
been disconnected or retrieved by someone else.
Call Pickup
To answer a call placed to 1 Press [ Call Pickup ]
a member of your pickup or Dial Call Pickup code
group when your voice
Called voice terminal stops ringing
terminal is idle ●
● You are connected to ringing call
To pick up a call while 1 Press [ Hold ]
you are active on another
Present call is put on hold
call ●
● Green light flutters
2 Press [ Call Pickup ]
●
Called voice terminal stops ringing
● You are connected to incoming call
Note: To return to held call after completing pickup
call, press fluttering [
xxxxx ]
Conference ✔
To add another party to a
1 Press [ Conference Ring ]
[dial tone]
call (for a total of up to
6 parties)
●
Present call is put on hold, and you are given a
new call appearance; all other parties remain
connected to each other
2 Dial number of new party and wait for answer
Note: You can privately discuss the call with the new
party at this time; if no answer or busy, press
fluttering [
xxxxx ] to return to held call.
3 Press [ Conference Ring ] again
● All parties are now connected
● Repeat Steps 1-3 for additional conference
connections
12