Thermo Fisher Scientific Alpha pH 800 - Manual (Page 17)

10
4.1.2 Display
The LCD display features two numerical displays that show status messages
and measured values for easy, quick reference. The display provides short-text
information for setting parameters and configuration.
• MEAS: Measurement mode
• SETUP: Set-up mode of function groups
• CAL: Calibration mode of pH/ORP
• READY: Comes on after a successful
calibration
• HOLD: Relay position and current output
are frozen
• ATC: Comes on in the ATC mode.
Disappears in the Manual temperature
Compensation mode.
“ATC” flashes if the temperature probe is
faulty in its ATC mode
• Display for RELAY A/B. Green LED indicates measured
value within limit while RED LED indicates measured
value outside limit.
• Alarm display if limit value overshoot or the ATC probe
fails.
7.00
25.0
ATC
SETUP
HOLD
CAL MEAS CON
READY
pH
o C