Thermo Fisher Scientific Alpha pH 800 - Manual (Page 34)

27
7.5
Calibration (CAL) sub-function
The calibration procedure in Advanced Set-up mode is identical to the procedure
in the Calibration mode. The only difference is that controller will revert back to
Set-up mode (instead of Measurement mode) after calibration is completed.
7.5.1 Entering
Calibration mode from Advanced Set-up mode
1) Enter Advanced Set-up mode. Press ENTER key.
2) Press
Δ or ∇ keys to scroll until upper display shows “CAL”.
3) See section 6 for complete calibration procedures.