West Control Solutions CI 45 - Manual (Page 47)

. 8 Parameter setting level
8.1 Parameter survey
Dependent on instrument version, display of parameters which are not required is suppressed.
8.2 Adjustment
• The parameters can be adjusted by means of keys
ÈÌ .
• Transition to the next parameter is by pressing key
ô.
• After the last parameter of a group, donE is displayed and the transmitter changes to the next group
automatically.
g
Press key
ô during 3 s to return to the beginning of a group.
Unless a key is pressed during 30 sec., the transmitter returns to the operating level (timeout = 30 s) .
Parameter setting level
UNIFLEX CI 45 Parameter survey 47