Airedale StoreMaster 50kW - 77kW - Manual (Page 6)

STOREMASTER
™
Comfort
6
Comfort Range
Technical Manual : 6678403 V1.3.0_ 02_2013
General Description
STANDARD FEATURES - GENERAL
Construction The base is fabricated from galvanised steel to ensure a tough, durable,
weatherproof construction.
Unit support can be provided by concrete/steel pillars to each corner of the rigid
steel base.
The superstructure is manufactured from galvanised sheet steel coated with epoxy baked
powder paint to provide a durable and weatherproof finish.
Standard unit colour is Light Grey (RAL 7035).
Compressors are mounted on a rigid galvanised heavy-duty sub frame. Fully
weatherproofed electrical panels are situated at one side of the unit. Access to all major
components sections of the unit are via either hinged or removable panels.
Construction includes duct flanges/mounts to accept self support ducting of up to 4m.
A set of removable 4 M24 collared lifting eye bolts to BS4278 are supplied.
Refer to Dimensional Data , on page 41 for unit layout.
Weather Louvres - Packaged A weatherproof louvre is fitted to the fresh air intake and exhaust air as standard, to
protect internal components, complete with bird mesh.
Refer to Weather Louvres - Split System , on page 14 , for split system louvre arrangement.
Refrigeration As standard the packaged unit is supplied with a full operating charge of R410A
refrigerant.
As standard the split unit is supplied with sufficient charge of R410A refrigerant to cover
5m of interconnecting pipe work. Refer to
Split Delivery , on page 13 for split
case arrangement.
The cooling only unit has a single refrigeration circuit.
The Heat Pump unit has a two independent refrigeration circuits.
For further details, refer to System Pipework Schematic , on page 20.
Cooling Only Unit EVAPORATOR SECTION INCLUDES:

Electronic expansion valve (EEV)

Liquid line sight glass

Discharge line ball valve

Large capacity filter drier

Low pressure switch with manual reset via microprocessor controller

High pressure switch with manual reset

Suction and liquid pressure transducers
CONDENSING SECTION INCLUDES:

Liquid line ball valve
 5/16” Schrader for gauge connection