Badger Meter GALAXY - Manual (Page 9)

Installation Manual
Page 9 June 2014
Mounting Endpoint under a Mlastic or Composite Mit Lid with Standard Mounting Bosses
1 . Position the GALAXY endpoint onto the mounting plate .
a . Place one side of the endpoint mounting tab under a locking key (Figure 7) .
b . On the opposite side, push down under the other locking key to snap the unit into place .
Figure 7: One side under locking key
Figure 8: Both sides under locking keys
2 . Remove the pit lid and turn it over .
3 . Position the mounting plate and endpoint over a flat area on the pit lid . Align the two mounting holes with the
mounting bosses on the pit lid . See Figures 9 and 10 .
Figure 9: Round pit lid
Figure 10: Rectangular pit lid