Badger Meter 3100 Series Flow Monitor - Manual (Page 6)

Page 6
2-12
Series 3000 Flow Monitor
Programming the Series 3000 Flow Monitor
Programming is menu driven. All data is entered using the LCD/keypad interface. A password gate is included to prevent
unauthorized access to programming parameters. Programming flexibility is extended to units of measure. In addition to
several factory units of measure, the Series 3000 software permits the custom units for rate and total to be created by the
installer.
The Series 3000 Flow Monitor provides one Form C solid-state relay, and one solid-state switch output. Both are fully
programmable as either Pulse/Volume, or Set Point control. For pulse output, the installer can program both the resolution
and the pulse width. Set Point control is extremely versatile with fully independent set and release points, each with its own
time delay.
Available options:
• Analog output
• Analog input
• Single flow channel iInput
• One control relay output
• One programmable pulse output
• Low voltage AC/DC supply
• USB
• RS485 w\BACnet™ or Modbus® protocols
• Wall mounting
3000 Series Ordering Matrix
Example: 3000 - x x
Series
Flow Monitor 3000 -
Outputs No Option 0
Analog Output, plus RS485 with
BACnet and Modbus, and USB
1
Mounting
Panel Mount, NEMA 4x Front Panel
0
Wall Mount, NEMA 4x 1