Innotech Maxim - Manual (Page 17)

Page 17
MAXIM Installation Instructions
© Mass Electronics Pty Ltd 2011 Chapter 2 – Mechanical Information
2-2 Physical Description and Dimension Diagrams
2-2.1 Overview
This section of the manual provides information on the general physical characteristics of the MAXIM
Series controllers, followed by dimension diagrams to help with the mechanical installation.
Figure 2-2: MAXIM I and MAXIM II Controller Dimensions
Please note that ALL physical dimensions illustrated in this section are in millimetres.
NOTE
2-2.2 MAXIM I, II, III, and 1010 Controllers
The MAXIM Series I, II, III, and 1010 controllers are housed in DIN cases and are suitable to be mounted
on DIN rail.
The exact dimensions of the MAXIM I and MAXIM II controllers are shown in Figure 2-2 below. Figure
2-3 on the next page shows the dimensions of the MAXIM III and MAXIM 1010 controllers.