Milestone XProtect Express 2014 - Manual (Page 127)

Milestone XProtect ® Express 2014 Administrator's Manual
www.milestonesys.com 127 Advanced configuration
Name Description
Set selected template value on
selected cameras
Apply only a selected value from the template to selected cameras.
New schedule profile
Create a new schedule profile of any type by clicking the Create...
button.
Properties available in XProtect Enterprise and XProtect Professional only:
SMS
Select the required profile for the SMS notification schedule for the
camera(s) in question. You specify a camera's SMS notification
periods by creating schedule profiles based on periods of time
(example: Mondays from 08.30 until 17.45), shown in green:
PTZ Patrolling
Only available for PTZ (pan-tilt-zoom) cameras with patrolling, the
continuous movement of a PTZ camera between a number of
preset positions. Lets you select the required profile for the PTZ
patrolling schedule for the camera(s) in question.
You specify a camera's patrolling schedule based on patrolling
profiles within particular periods of time (example: Mondays from
08.30 until 17.45), shown in red:
Scheduling options
When you configure general scheduling and archiving (see "Configure general scheduling and
archiving" on page 125), you can specify certain properties for many cameras in one go. In the case of
Scheduling Options, it is because the properties are shared by all cameras.
Name Description
Start cameras on client
requests
Cameras may be offline, for example because they have reached
the end of an online recording schedule (see "Online period" on
page 129), in which case client users will not be able to view live
video from the cameras. However, if you select Start cameras on
client requests, client users will be able to view live video from the
camera outside online schedule
—but without recording (technically:
force the camera to be online outside its online schedule).
You must select Enable recording when started on client
request (see the following), if you want recording to take place.
Enable recording when
started on client request
Enable recording on the camera when Start cameras on client
requests (see the previous) is also selected.
If a user does not have access to manual recording (see "Camera
access" on page 153), selecting Enable recording when started
on client request, will not enable the user to do manual recording.