Milestone XProtect Express 2014 - Manual (Page 54)

Milestone XProtect ® Express 2014 Administrator's Manual
www.milestonesys.com 54 Getting started
Name Description
Detection interval
Specify how often motion detection analysis is carried out on video
from the camera. The default is every 240 milliseconds (close to
once a quarter of a second). The interval is applied regardless of
your cameras' frame rate settings.
Adjusting this setting can help lower the amount of system
resources used on motion detection.
Detection resolution
Specify whether the full image or a selected percentage of the
image should be analyzed. For example, by specifying 25%, every
fourth pixel is analyzed instead of all pixels, reducing the system
resources used but also offering less accurate motion detection.
Properties available in XProtect Enterprise only:
Keyframe Only
Select Keyframe only if you want motion detection to take place
only on keyframes of the video stream to reduce the system
resources used on motion detection.
Manage user access wizard
Use the Manage user access step to add individual users so they can access the system and its
clients. The access summary at the end of the wizard lists the cameras your users have access to.
Important: When you use the wizard, all users you add get access to all cameras, including any new
cameras added at a later stage. You can, however, specify access settings, users and user rights (see
"Configure user and group rights" on page 151) separately, see Configure server access (on page
147). You cannot add users to groups (see "Add user groups" on page 150).
Manage user access: Basic and Windows users
Active Directory ® is supported in XProtect Enterprise 2013+ and XProtect Professional 2013+ only.
You can add client users in two ways. You can combine these if you need to.
Name Description
Basic user
Create a dedicated surveillance system user account with basic
user name and password authentication for each individual user.
Windows user
Import users defined locally on the server or from Active Directory,
and authenticate them based on their Windows login.
Note: You must define users as local PC users on the server and disable simple file sharing on the
server.
Add Basic users
1. Specify a user name and password, and click the Add Basic User button. Repeat as
required.