Milestone XProtect Express 2014 - Manual (Page 158)

Milestone XProtect ® Express 2014 Administrator's Manual
www.milestonesys.com 158 Advanced configuration
Delete a Mobile server
1. From the navigation pane, expand Servers > Mobile Servers in order to see existing servers.
2. Right-click the unwanted server and select Delete.
3. Click Yes.
Rename a Mobile server
1. From the navigation pane, expand Servers > Mobile Servers in order to see existing servers.
2. Select the required Mobile server.
3. On the Info tab, which opens once the Mobile server is selected, change the name of the
server by typing in the Server name and Description fields.
4. In the lower right corner, click Apply.
5. In the toolbar, click File > Save.
Add a Video push channel
Each Video push channel requires a separate camera license.
To add a Video push channel (see "About Video push" on page 157), do the following:
1. On the Video Push tab, select the Video push checkbox to enable the functionality.
2. In the bottom right corner, click Add to add a video push channel to the Channels mapping.
3. Channels are mapped to devices through user names. Select a user name from a user
account already set up in your system to associate with the relevant Video push channel.
If you do not associate the Video push channel with an already created user, you cannot use
Video push in your Milestone Mobile client when you log in.
4. Add the Video push driver as a hardware device (see "Add a Video push driver as a hardware
device" on page 158) to the system. You must choose the Manual hardware device detection
method as the Video push driver does not show up in automatic hardware searches.
5. On the Video Push tab, click Find Cameras. If successful, the newly added Video push driver
appears in this list. Save your configuration to make the Video push driver ready for use.
You can remove video push channels you do not require. To do so, select the relevant channel and
click Remove in the bottom right corner.
Add a Video push driver as a hardware device
If you add a Video push channel, you must add the Video push driver to your Management
Application/Management Client. To do so:
1. Open the Add New Hardware Wizard in your Management Application/Management Client.