NORD Drivesystems Berges-VG - Manual (Page 18)

5 Commissioning
Stop!
The drive may be commissioned only by trained specialists.
Caution !
Fit the wide V - belt beforehand if commissioning after three months ( see also
Point 4.2, Page 14 ).
5.1 Before commissioning
Caution !
Secure the drive to prevent the power supply being switched on unintentionally.
( Attach a corresponding information sign to the switch-on point )
Please check the following:
ƒ Is the drive properly secured mechanically ?
( Check securing bolts for firm attachment and retighten it if necessary )
ƒ Are the electrical connections ok ? ( Check the direction of rotation before
commissioning - if necessary - and reverse two phases if necessary )
ƒ On gearboxes with vent:
Has the travel plug been removed replaced by the ventilation plug ?
5.2 During Operation
ƒ Conduct regular checks and inspections during operation. Watch out particulary for
unusual noises and/or high temperatures, leaks, loose securing elements and the
condition of the electrical cables.
ƒ Should malfunctions or faults ever occur, please consult the troebleshooting table
in Chapter 7. If the fault or malfunction can still not be remedied, please inform
BERGES After-Sales Service.
Stop!
Never adjust the speed at standstill !
Adjusting the speed at standstill damages the RGAE !
18
Commissioning