Sterlco A3 Blender Control and Data Acquisition Software User Manual
Page 76
Advertising
![background image](/manuals/373421/76/background.png)
Page Number 76
Step 4: hit “1” or “2” to increase or decrease Serial ID, then Backup
Step 5: hit “1” or “2” to change Baud Rate, then Backup
The SERIAL SETUP section is the same for all proprietary devices on the
network (changing the settings here means changing it for all devices).
The COM Port should be set to whatever the USB RS422/485 is set to. To
check the USB RS422/485 port setting:
Advertising