Caution, Threading the machine – Brother SQ9185 User Manual

Page 19

Advertising
background image

17

1

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

THREADING THE MACHINE

Winding the bobbin

This section describes how to wind the thread onto the bobbin.
• For details on the fast bobbin winding, see page 20.

a

As shown, press down on the spool pin lever
with your finger.

X

The spool pin swings up.

b

Remove the spool cap.

a Spool pin
b Spool cap

Only use bobbins (part code: SA156, SFB: XA5539-151) that have been designed for this sewing

machine. Using other bobbins may cause damage to the machine.

We designed the bobbin that comes with this machine. If you use bobbins from other models, the

machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the
same type (part code: SA156, SFB: XA5539-151).

a Bobbin-winding

thread guide

b Bobbin winder shaft
c Bobbin

CAUTION

Actual size

This model

Other models

11.5 mm

(7/16 inch)

Do not grab the bar to raise the spool pin,

otherwise, the spool pin may bend or break.

CAUTION

Be sure to raise the spool pin when winding

the bobbin. The thread may become tangled if
the bobbin winder is used without raising the
spool pin.

CAUTION

Advertising