Caution – Brother SQ9185 User Manual

Page 69

Advertising
background image

67

3

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

c

Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the disc-shaped screwdriver in
your left hand.

a Presser foot holder screw

d

Slide the feed dog position lever, located at the
rear of the machine on the base, to

(to

the right as seen from the front of the machine).

a Feed dog position lever

(as seen from the rear of the machine)

X

The feed dogs are lowered.

e

Turn on the sewing machine, and then select a
stitch.

f

Use both hands to hold the fabric taut, then
move the fabric to follow the pattern.
Reinforcement stitches are sewn at the
beginning and end of sewing.

a Pattern

g

After sewing is finished, slide the feed dog
position lever to

(to the left as seen from

the front of the machine) and turn the
handwheel to raise the dogs.

• Normally, the feed dog position lever is

positioned at

.

Be sure to securely tighten the screws with

the disc-shaped screwdriver, otherwise the
needle may touch the presser foot, causing it
to bend or break.

CAUTION

Advertising