Caution, Quilting – Brother SQ9185 User Manual

Page 67

Advertising
background image

65

3

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

d

Sew with the side of the presser foot aligned
with the edge of the fabric.

For a seam allowance on the right side

Align the right side of the presser foot with the

edge of the fabric, and sew using stitch

.

a 6.5 mm (1/4 inch)

For a seam allowance on the left side

Align the left side of the presser foot with the

edge of the fabric, and sew using stitch

.

a 6.5 mm (1/4 inch)

Memo

● To change the width of the seam allowance

(the needle position), adjust the stitch width.
For details, refer to “Changing the needle
position” (page 49).

Quilting

Sandwiching batting between the top and bottom
layers of fabric is called “quilting”. Quilts can easily
be sewn using the optional walking foot and the
optional quilting guide.

Note

● Only use the walking foot with straight or

zigzag stitches. Do not use other patterns.
Reverse stitches cannot be sewn with the
walking foot.

Models equipped with a needle threader
● Thread the needle manually when using the

walking foot, or only attach the walking foot
after threading the needle using the needle
threader.

a

Baste the fabric to be quilted.

b

Remove the presser foot and the presser foot
holder.

• For details, refer to “Removing the presser

foot holder” (page 37).

c

Hook the connecting fork of the walking foot
onto the needle clamp screw, lower the
presser foot lever, and then use the presser
foot holder screw to attach the walking foot
to the presser bar.

a Connecting fork
b Needle clamp screw
c Presser foot holder screw

d

Select

stitch ,

or .

e

Place one hand on each side of the presser
foot, and then evenly guide the fabric while
sewing.

Note

● When sewing with the walking foot, sew at

a speed between slow and medium.

1

1

Use the disc-shaped screwdriver to tighten

the screw securely. If the screw is loose, the
needle may strike the presser foot and cause
injury.

Be sure to turn the handwheel toward the

front of the machine to check that the needle
does not strike the presser foot. If the needle
strikes the presser foot, injury may result.

CAUTION

Advertising