Brother SQ9185 - Manual (Page 78)

76
UTILITY STITCHES —————————————————————————————————————————————————————————————————————————————————————————————————————
d
Press the “+” side of (stitch width
adjustment key) to enter the selected
character.
a Stitch width adjustment key
X The following display is shown on the
LCD.
a Selected pattern No.
b The position of the selected pattern No.
c The total number of entered characters
e
Attach the presser foot indicated on the LCD.
a The presser foot to use
• For details, refer to “Replacing the presser
foot” (page 36).
f
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, see the following procedure.
• For details on sewing characters, refer to
“Sewing the character stitches” (page 78).
■ Combining characters
You can easily sew names, messages, etc. by
combining the character stitches. Up to 35
characters can be combined.
[Example] Selecting stitches “COME”
(No. 03)+(No. 15)+(No. 13)+(No. 05)
a
Follow steps
a
through
e
in “Selecting a
character” (page 75) to select the first
character “C” (No. 03).
b
Press (stitch selection keys) to select the
next character, “O” (No. 15).
c
Press the “+” side of (stitch width
adjustment key) to enter the selected
character.
a Stitch width adjustment key
d
Repeat steps
b
and
c
to add “M” (No. 13)
and “E” (No. 05).
Memo
● To enter a space, select “_” (No. 30).
e
When you have finished combining
characters, check the entered characters and
their order.
• For details on checking characters, refer to
“Checking characters” (page 78).
Memo
● A new character can only be added next to
the last character. You cannot insert a new
character between characters or before the
first character of the sequence.