Brother SQ9185 - Manual (Page 80)

78
UTILITY STITCHES —————————————————————————————————————————————————————————————————————————————————————————————————————
Checking characters
You can check the characters in a combination with
following method.
a
Press the “+” or “-” side of (stitch length
adjustment key) repeatedly.
This will display the characters that have been
entered one by one on the LCD.
You can check the pattern No. and position of
each character.
a Stitch length adjustment key
b The position of the selected pattern No.
c The total number of characters in the
combination
d Selected pattern No.
Deleting characters
You can delete characters from the combination.
a
Press “-” side of (stitch width
adjustment key) to delete the last character in
the combination.
a Stitch width adjustment key
X The last character will be deleted.
Memo
● Repeat step
a
to delete more characters.
● You can only delete the last character in a
combination.
Sewing the character stitches
All character stitches are sewn with monogramming
foot “N”.
a
Select a character stitch.
• For details, refer to “Selecting characters”
(page 75).
b
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 36).
c
Start sewing.
X
The stitch is sewn in the direction
indicated by the arrow.
Memo
● When sewing characters, the machine
automatically sews reinforcement stitches
for each character.
● While sewing, the LCD shows the pattern
No. currently being sewn.
d
When you have finished sewing, use scissors
to trim off any excess threads at the beginning
of the stitching and between the characters.