Brother MFC-J410W - Manual (Page 106)

Troubleshooting
99
9
I want to check my network devices are working properly.
Question Interface Solution
Is your Brother machine,
access point/router or
network hub turned on? wired/
wireless Make sure you have confirmed all instructions in Make sure that the
following items are configured before reading this chapter. on page 94.
Where can I find the
machine's network settings,
such as IP address? wired/
wireless Printing the Network Configuration List. See Printing the Network
Configuration List on page 78.
Check the Link Status in
the Network Configuration
List. wired/
wireless Printing the Network Configuration List and check that
Ethernet Link Status or Wireless Link Status is Link OK.
If the Link Status shows Link Down or Failed to Associate, start over
again from the Make sure that the following items are configured before
reading this chapter. on page 94.
Is the Brother machine
connecting to the wireless
network? wireless Print the WLAN Report to confirm the state of a wireless connection. (For
how to print, see Printing the WLAN Report on page 79.)
If there is an error code on the printed WLAN report see Troubleshooting in
the Quick Setup Guide.