Brother MFC-J410W - Manual (Page 76)

Control panel setup
69
5
e
Press a or b to choose Node Name.
Press OK.
f
Enter the Node Name.
(For MFC models) Press OK.
(For DCP models) Press a, b, d or c to select
, and press OK.
Note
For DCP models, for information how to enter text, see Entering Text on page 112.
g Press Stop/Exit.
WINS Config
5
This selection controls how the machine obtains the IP address of the WINS server.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c For DCP-J715W, MFC-J615W and MFC-J630W
(For Wired) Press a or b to choose Wired LAN, and press OK.
(For Wireless) Press a or b to choose WLAN, and press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose WINS Config.
Press OK.
f
(For DCP-J315W, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W)
Press a or b to choose Auto or Static.
Press OK.
(For DCP-J515W, DCP-J715W, MFC-J615W and MFC-J630W)
Press d or c to choose Auto or Static.
Press OK.
g Press Stop/Exit.
Auto
5
Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS
servers. You must set the BOOT Method to Auto or DHCP for this feature to work.
Static
5
Uses a specified IP address for the primary and secondary WINS servers.
OK OK